Self-priming electric water pump with

special impeller for prolonged service

life and better performances.

Suitable for fresh or salt water,

for intermittent use.

Self-priming electric pump for the transfer of various liquids, for intermittent use. The pumping elements are bronze gears which can allow the pump to run dry for short periods. Complete with in-line filter.

Self-priming electric pump for heavy duty operations whenever a prolonged service or a pressure of maximum 4 bar are required. The pumping elements are bronze gears which can allow the pump to run dry for short periods.

Electric gear pump particularly suitable for the transfer of lubricating oils or viscous liquids. Complete with two brass connections for 14mm inner tube and one additional quick-fit connection for 8mm external Rilsan tubing. By using the special kit (Cod.06130), supplied separately, the pump can be employed for draining exhausted lubricating oil out of oil sumps of engines, particularly marine engines. Operation is done through the dip stick tube.

Electric gear pump particularly suitable for use in the food industry, where it is essential that all parts in contact with the liquid are of non corrosive materials. Complete with in-line filter.

Electric gear pump particularly suitable for use in the chemical field where it is essential that all parts in contact with the liquid are of non corrosive materials. Resistant to most acid and alkaline solutions. Complete with in-line filter.

Self-priming electric gear pump equipped with filter, pressure switch and non-return valve to be used as automatic pump for water pressure systems on boats, mobile homes, etc.

Self-priming electric gear pump equipped with filter, pressure switch and non-return valve to be used as automatic pump for water pressure systems on boats, mobile homes, etc.

Self-priming electric gear pump equipped with filter, pressure switch and non-return valve to be used as automatic pump for heavy duty operation whenever a prolonged service or a pressure of maximum 4 bar are required.

Completely submersible bilge pump. Compact design with ABS plastic housing, corrosion resistant. Rubber lip seal. Water inlet strainer slots will screen particles present in the bilge allowing an easy running. Pump body can be dismantled by a simple snap-off movement for easy inspection and cleaning.

Self-priming electric pump for the transfer of various liquids, for intermittent use. The pumping elements, bronze gears, will allow the pump to run dry for short periods.